[christianw.]

Auf dem Tisch eine E-MU 0202 von Alfred,

bootet selten bis gar nicht - meist nicht. Mit ein wenig gutem Zuspruch tut sie dann aber doch.

Debug-Schnittstelle sagt:

Zitat:© Copyright 2005-2006  Creative Technology Ltd
MICROPOD FW Ver 8.4.071119 14:20:20
UPGRADE image heap free scratch 35648 loadstore 2016 extram 35616
Starting con=Œ ,rrrHøBus power, low speed
Starting UI task ...  heap free scratch 17216 loadstore 2016 extram 30592
Tasks started heap free scratch 17216 loadstore 2016 extram 30592
DM In Stereo
UI task invalid button 1
Init done heap free scratch 17216 loadstore 2016 extram 30048
Initializing Diag task ...  heap free scratch 17216 loadstore 2016 extram 30048
Done... heap free scratch 16160 loadstore 2016 extram 28192
Starting Diag task ...  heap free scratch 16160 loadstore 2016 extram 28192
pDebugControl=0xc0baa4
Bus reset
Bus reset
Done... heap free scratch 16032 loadstore 2016 extram 28192
test point addr = 0x200018, value = 0xabcdef00
Bus reset
Bus reset
Full power
Power event, mbFullPower 1

© Copyright 2005-2006  Creative Technology Ltd
MICROPOD FW Ver 8.4.071119 14:20:20
UPGRADE image heap free scratch 35648 loadstore 2016 extram 35616
Starting con=Œ ,rrrHøBus power, low speed
Starting UI task ...  heap free scratch 17216 loadstore 2016 extram 30592
Tasks started heap free scratch 17216 loadstore 2016 extram 30592
DM In Stereo
UI task invalid button 1
Init done heap free scratch 17216 loadstore 2016 extram 30048
Initializing Diag task ...  heap free scratch 17216 loadstore 2016 extram 30048
Done... heap free scratch 16160 loadstore 2016 extram 28192
Starting Diag task ...  heap free scratch 16160 loadstore 2016 extram 28192
pDebugControl=0xc0baa4
Done... heap free scratch 16032 loadstore 2016 extram 28192
Bus reset
Bus reset
test point addr = 0x200018, value = 0xabcdef00
Bus reset
Bus reset
Full power
Power event, mbFullPower 1
Mono Button out/off/released.
S/PDIF Select Button out/off/released.
48V Phantom Button out/off/released.
Direct Monitor Button out/off/released.
StateInternal -> action New_Sample_Rate @ 1520 ms

Abgesehen vom Fehler "Bus Reset" scheint da noch eine SPDIF versteckt.